Ozone 90 Degree One Pump Valve by FixMyKite is the perfect 'Self-Stick' replacement for leaking Ozone kite valves. This is the valve used on Ozone 2014+ model kites and can be installed in under 5 minutes.
Our valves will stick on any Leading Edge Bladder material, in any colour! Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.
FixMyKite are the global benchmark in 'Self-Stick' valves, trusted everyday by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original Ozone OEM valve backed by Tear-Aid and made by FixMyKite.
Introducing the MEGA-PATCH with 77% more Tear-Aid! Perfect for when you need to cut away your old valves or when you get a split in the bladder at the base of the existing valve. The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.
NOTE: If you own a 2007 - 2013 Ozone Kite then the Standard Ozone One Pump Valve or Slingshot One Pump Valve are the correct replacements.
HOW TO REPLACE:
- Valve Removal: If replacing the valve, carefully peel off old valve. If old valve does peel off, cut around the circumference of the valve to remove
- Cleaning: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
- Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
- Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.
*Pro Tip - Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the self-stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.