Ozone High Volume Straight One Pump Valve by FixMyKite is the perfect 'self-stick' replacement for leaking Ozone leading edge valves. This valve is used on 2021 and newer Ozone model kites and requires a larger diameter one pump hose. The low-profile shape will also retrofit onto any 2007-2013 Ozone model kite and is compatible with Slingshot, 2013 CrazyFly, Star, Flexifoil, Munity, and Ben Wilson (BWSurf) kites.
Backed by Tear-Aid these valves are incredibly durable and will stick directly on to your kite bladder. Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.
FixMyKite is the global benchmark in 'Self-Stick' valves, trusted everyday by professional repairers around the world. When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're receiving an original Ozone OEM valve backed by Tear-Aid and made by FixMyKite.
Introducing MEGA-PATCH with 77% more Tear-Aid! Perfect for when you need to cut away from your old valves or when you get a split in the bladder at the base of the existing valve. The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.
HOW TO REPLACE:
- REMOVE: Carefully peel off the old valve. If the old valve does not peel off, cut around the valve to remove it.
- CLEAN: Wipe the area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
- STICK: Lay bladder out flat. If possible, have a friend lightly hold the bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
- PRESS: Press the valve from the center outward to remove air bubbles and ensure proper adhesion and creases.
PRO TIP - Use a hairdryer to heat the valve, especially in cold weather. This makes it easier to remove the valve from the backing paper. After placement of the self-stick valve use the hairdryer again to warm the adhesive. Press the valve from the center out, massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve. Following this method will guarantee your valve sticks in all conditions, and it really helps the Tear-Aid adhesive provide a permanent and lasting repair.